Flat Mountain Bike Pedals: Things You Should Know!

Anyone who works on cars as a hobby will gladly tell you that every last detail can make a difference. A faulty part here, a lose bolt there, and your vehicle may not run efficiently (or at all, for that matter).

List & Comparison of the Flat Mountain Bike Pedals:

PhotoProductFeatureWeightDetails
BONMIXC Mountain Bike PedalsBONMIXC Mountain Bike PedalsBearings-40.83lbMore Information
RaceFace Chester Mountain Bike PedalRaceFace Chester Mountain Bike Pedal8-pins340gMore Information
Imrider Lightweight Polyamide Bike Pedals for BMX Road MTB BicycleImrider Lightweight Polyamide Bike Pedals for BMX Road MTB BicycleBearing-111.4ouncesMore Information
VP Components VP-Vice PedalsVP Components VP-Vice PedalsPins-14406gMore Information
Crank Brothers Stamp Flat BMX/MTB Bike PedalCrank Brothers Stamp Flat BMX/MTB Bike PedalPins-10375gMore Information

Though it might surprise some new cyclist, the same mentality applies to mountain bikes. Without the right parts installed on your bike, you may be putting in more work than necessary in order to ascend mountains and glide through valleys.

Review of the Best MTB Bike Pedals:

1. BONMIXC Mountain Bike Pedals – Best Basic Flat Mountain Bike Pedals

Features

  • Construction material – aluminum alloy
  • Quantity of Pins – 16
  • Quantity and Type of Bearing – 4, sealed
  • Color options – 4 (Black, blue, red, titanium)
  • Extra Features – Triangular architecture, 9/16″ screw thread

More and more mountain bikers are turning to the BONMIXC Mountain Bike Pedals after hearing about their unmatched grip rating and overall impressive durability. With four sealed bearings in each pedal, this model also provides the optimal balance between torque and spin when you’re moving at top speed.

When it comes to grip, few replacement pedals can compare to the BONMIXC’s peg volume. With 16 pegs on each pedal, you can be sure that your feet will remain firmly adhered even as you roll over the rockiest of mountain roads. These pegs push through on both sides, ensuring that you’ll always come up with a solid grip when your pedals spin free.

Durability also marks the BONMIXC as among the best. This model’s aluminum alloy body helps it remain sturdy even after multiple impacts while also remaining fairly lightweight. With this model’s triangular architecture, it’s even more able to transfer shocks throughout its structure without warping or bending.

Overall, these BONMIXC are the best overall mountain bike pedals that pros and amateurs alike will grow to appreciate after just a single ride.

Pros

  • Unique triangular architecture for enhanced stability
  • 16 skid-proof pins for added grip
  • Lightweight at only 0.37lb per pedal

Cons

  • Some sharp edges

2. RaceFace Chester Mountain Bike Pedal – Best Mountain Bike Flat Pedals Under $50

Features

  • Construction material – nylon composite
  • Quantity of Pins – 8
  • Quantity and Type of Bearing – 1 (bearing & bushing)
  • Color options – 8 (red, orange, yellow, green, blue, turquoise, purple, black)
  • Extra Features – chromoly steel axel, 2-year manufacturer warranty

An ideal mountain bike pedal is able to convert every ounce of torque applied to it into the biking motion while also remaining sturdy over the course of many, many hard mountain courses. Such qualities define these RaceFace pedals to the “T” as its lightweight nylon composite body is able to take a hit or two without showing any wear at all.

Meanwhile, this model’s unique bearing and bushing system incorporate a fully sealed cro-mo axle in order to turn perfectly in sync with the user’s leg strokes. While this axel system remains well lubricated, for the most part, those in need of a little grease will be able to do so using this axel’s fully serviceable access point.

Parents shopping for new pedals for their child’s colorful bikes should also take note: these RaceFace pedals come in every color of the rainbow. As such, you’ll be able to find a pair to complement your child’s unique spirit and cycling equipment.

As a premium pick, these RaceFace pedals come in with a higher-than-average price tag. But even so, these medals clock in at under $50, ensuring that they are still within the price range of most budget-conscious bikers.

Pros

  • 8 color options to match any child’s mountain bike
  • 8 hex traction pins per pedal
  • Extra durability provided by fully sealed cro-mo axle and nylon composite exterior

Cons

  • Bearings may require extra greasing

3. Imrider Lightweight Polyamide Bike Pedals for BMX Road MTB Bicycle – Best Mountain Bike Flat Pedals Under $30

Features

  • Construction material – corrosion resistant polyamide
  • Quantity of Pins – 8
  • Quantity and Type of Bearing – 1 (sealed)
  • Color options – 4 (black, red, blue, orange)
  • Extra Features – traditional platform style

These Imrider pedals appear on many cyclist’s shopping list owing to their affordable pricing. But even beyond their low price tag, these MTB pedals have a great deal to offer in terms of performance and construction.

When your foot lands on these pedals, you can be sure that you’ll have a sure grip across this model’s traditional platform architecture and 8 pins. These pins are uniquely arranged in a 5-3 formation that maximizes your traction as you engage and press onto the pedal with your arch.

In terms of construction, these pedals certainly don’t shrink on quality. Each pedal is in fact made of a corrosion resistant polyamide that also resists abrasion with ease. If these Imrider pedals suffer from any one weakness, though, it certainly comes at its single bearings. These are prone to wear down fairly quickly, making these a better choice for casual mountain bikers.

Pros

  • Traditional platform style to replace standard pedals
  • Anti-skid nails in unique 5-3 orientation
  • Corrosion resistant polyamide exterior

Cons

  • Single bearing wears down quickly

4. VP Components VP-Vice Pedals – Best Beginner Flat Mountain Bike Pedals

Features

  • Construction material – CNC machined aluminum
  • Quantity of Pins – 14
  • Quantity and Type of Bearing – 1 (sealed)
  • Color options – 4 (black, red, blue, grey)
  • Extra Features – heat treated Cr-Mo axle, sealed cartridge bearings

On the outside, these VP Components pedals don’t look like much. But once you equip them to your favorite mountain bike, you’ll immediately see why they are gaining popularity in the cycling community. Many current users speak highly of their CNC machined aluminum bodies, which only weigh in at modest 406 grams per pair.

Those who are looking for customizability to shave a few extra grams off of their bike weight will appreciate what these VP Components pedals have to offer. Specifically, these VP Components pedals can be purchased with a titanium axle upgrade kit that shaves nearly 70 grams off of their overall burden.

In terms of grip, these pedals still provide your feet plenty to grab onto across its 14 replaceable back-out steel pins. These pins are well spread out as well, allowing you to take full advantage of these pedals’ low profile

Pros

  • 406 grams per pedal can be dropped by 70 grams with titanium axle upgrade kit
  • Sealed cartridge bearings to prevent water intrusion
  • Improved grip over 14 back-out steel pins

Cons

  • Do not spin particularly freely

5. Crank Brothers Stamp Flat BMX/MTB Bike Pedal – Best Flat Mountain Bike Pedals for Big Feet

Features

  • Construction material – T6 aluminum
  • Quantity of Pins – 10
  • Quantity and Type of Bearing – 2 (sealed)
  • Color options – 6 (grey, black, blue red, “raw”, “USA”)
  • Extra Features – 5-year warranty, broad platform, Enduro cartridge system

Finally, these Crank Brothers pedals are a great choice for bikers with large feet. Small pedals can be a pain to use, especially when you are trying to get the lead out as a bike up a sharp incline. These pedals are broad from axel to end, providing you with plenty of room to engage both the T6 aluminum body and the 10 adjustable pins

These pedals also spin surprisingly well, likely due to proprietary internal Enduro cartridge system. This system allows for a great range of movement, which is further facilitated by the internal Igus LL-Glide bearings. Water and dust won’t degrade this premium bearing either because each bearing is sealed against all outside air.

In all likelihood, these pedals are made in China. This may be a drawback for some who prefer American made products. But even so, the 5-year guarantee should provide plenty of time to try out these products and decide if they are right for you.

Pros

  • Broad platform for sizes 10-15 (US)
  • 5-year warranty on all components
  • Proprietary Enduro cartridge system with Igus LL-Glide bearings

Cons

  • Likely made in China

FAQ

Surprisingly, mountain bike pedals are one of several details that even experienced cyclists can overlook in their eagerness to hit the trail. But as it turns out, most default mountain bike pedals perform sub-optimally. Worse yet, they’re prone to break and wear down in short order.

As such, there’s a persistent need to replace these default pedals with purpose-built mountain bike pedals that provide the durability and performance you need to climb to new heights and power through endurance courses. Almost as a rule, replacement flat mountain bike pedals are better able to provide extra grip and torque while still remaining serviceable in the long-term. Altogether, proper mountain bike pedals are a must-have for any committed cyclist.

But this necessity begs the all-important question regarding how to pick the best MTB flat pedals. This question can be challenging to answer on your own, especially if you’ve never picked out new pedals before. In order to find a pair of new pedals that fits your needs, you’ll need to perform some extra research and compare prices at all of your local cycling stores.

That amount of daunting research won’t be necessary this time around, though, because every bit of crucial industry research on this topic has been gathered together into this guide on the top 5 best flat mountain bike pedals for 2019. Whether you’re looking for an affordably-priced model or the latest designs from brands such as RaceFace or Crank Brothers, you’ll find what you are looking for in this guide.

In order to fully understand why these 5 models stood out from the competition, I’ve reviewed each of them based upon key specifications and features including construction material, pin quantity, bearing quantity, color options, and more. Each review also includes a breakdown of important features as well as a succinct pro-con list that provides snappy information for the rushed mountain bike pedal shopper.

Amateur and professional mountain bikers alike agree that without the right pedals, you’ll be putting a lot more work in order achieve a standard level of success while vaulting up and down challenging forest trails. Moreover, mountain cyclists broadly agree that without enough grip, your feet a prone to slipping from your pedals. This can lead to some truly dangerous situations.

Luckily, devoted cyclists don’t need to rely on their default bike pedals if they want to get more out of their mountain biking experience. Indeed, they’ll be able to pick up and quickly install one of these top 5 industry-leading MTB bike pedal models.

This chart will start you on the right path towards purchasing your next set of MTB bike pedals. Each of these quick summaries includes a rundown of several key features in each model as well as a side-by-side comparison of several sought-after specifications.

Be sure to read on to the full review section as well in order to learn how each set of pedals performs when put through the rigors of full-on mountain biking.

About the author

Derek Wilcox